Worldwide manufacturer of Nextel ceramic fiber textiles and composite solutions including metal matrix and polymer composites, and epoxy bonding adhesives for the aerospace industry. [St. Paul, MN]

Composite materials manufacturer and supplier for industrial manufacturing, aerospace, automotive, and architectural applications. Metal Matrix composites.

USA. Design and manufacture of 3D woven and braided composite reinforcement materials, from carbon and glass fiber. Detailed technical information on PDF files.

Manufacture lightweight bullet resistant panels used in vehicles and architecture. Based on UHMWPE and aramid. [East Palmetto, FL]

Designing and manufacturing from advanced composites since 1982. Autoclave, RTM, VARTM. ISO 9001 and AS 9100, FAA Repair Station (EIGR091O). [Indiana]

Range of advanced fibre reinforced plastic laminates, ideally suited to highly loaded bearing applications. [UK]

Cost-effective and light weight sandwich panels, vacuum tables, laminates, and more for industrial, automotive, rail, marine and other industries. [MI]

High temperature thermal, halogen and vacuum purification services for graphite, composites, carbon filters, ceramics, metal oxides, alloys, tungsten and refractory materials.

Distributor of composite support materials, including vacuum bag films, release films, liquids, and fabrics, adhesive and sealant tapes, autoclave valves and hoses, castable urethane elastomer, and tooling resins.

Prototype parts, modeling, high-temp and room-temperature applications with prepreg materials or wet lay-up. [CA, USA]

USA. Wholesale suppliers of discount composite materials. Carbon fiber, fabrics and panels, and kevlar, aramid, fiberglass and graphite. Also, tooling materials.

NSW,Australia. Distributor of raw materials and equipment for the aerospace and composites industries.

Materials for lightweight applications, supplies woven fabrics, tubes and panels, finishing and tooling resins. Also offers catalog and technical information.

Manufacturer of High Temperature structural - thermal and electrical insulation boards and sheets suitable for temperatures from -45°C to 800°C.[Vadodara, India]

Composite and honeycomb specialists. Design and consultancy.

Manufacturers of composite materials and frp materials. Specializes in corrosion protection, pipe wrap, and pipeline repair.

Provides bagging film, release film, sealant tape, breather bleeder, flashbreaker tape, nylon film, composite tooling, composite materials, and vacuum bagging.

Manufacturer of base material products for the manufacturing of copper-clad and decorative laminates.

Manufacture and supply Composite Materials, Prepregs, Honeycombs, Adhesives, Tooling Materials, Consumables, Release Agents. Distribute toolmaking and prototyping materials. [Nottingham, UK]

Supplier of technologically advanced autoclaves and composite systems.?

Illinois-based fiberglass firm.

Florida. Continuous fiber reinforced thermoplastic composite materials.

Developer and manufacturer of composite materials. Small quantities can be supplied via e-mail orders. Price list available online. [Plainfield, CT]

Sweden. Design and manufacture of handling and application systems and accessories for resins and materials in the composite industry. Detailed product catalogs, with technical information in PDF files. Guide for gelcoat applications, spray-up processing, and spray equipment safety procedures.

Specializing in filament winding, compression molding, hand lay-ups and Autoclave curing. [Fayette, UT]

Distributor of advanced composite materials including epoxy resins, carbon fiber, honeycomb and foam core materials. [Indiana]

Massachussets. Supplier of microwave absorbing materials for commercial and defense applications.

Custom design, manufacture, and install decorative fiberglass ornamentation for the restoration, reproduction, and new construction industries. Products include custom cornices, columns, domes, cupolas, canopies, louvers, crosses, and fascia. [Cleveland, OH]

Manufacturing GRP for various applications and customers. [Fort Worth, Texas]

Derbyshire. Manufacture carbon fibre composite components for aerospace and Formula One (F1) motor racing industries.

Manufacture high performance thermoplastic composite materials. [NC]

Producer of reinforcement products for the composite industry. [Waltham, Mass.]

Specialise in the development of moulds, the production of thermoset parts, technical synthetics, injection and compression moulding. Multi-lingual site - French, German, Dutch and English. [Overpelt, Belgium]

Filament winding consultancy. Manufacturing lightweight composites for over 12 years, including structural tubes, driveshafts, cylinders and D.O.T. certified high pressure vessels. [West Liberty, Ohio]

Supply end grain balsa core materials globally. Distribute Airex structural foam core materials in North America.

Manufactures large, epoxy prepreg, composite panels and sheets, from which products and parts are machined, as well as manufacturing composite parts from dedicated tooling. Online interactive design, quoting and ordering.

Greensboro, NC. Fabrics for composites, electronics, reinforcements, insulation and filtration. Woven from E-glass fiber yarns, aramid and carbon. S-2 glass woven roving for armor. Owned by Porcher Industrie of France

Supplies rollers, dust collection, sprayers and other tools to manufacturers of fiberglass reinforced plastics.

Manufactures glassfibre reinforced Polyester (GRP) installations for a wide variety of applications both onshore and offshore. [Norway]

CA. Manufacturers reusable vacuum bag systems for curing composites and metalbond parts.

Manufactures church lighting fixtures and GRP parts for churches in US & Canada. Baptistries, steeples, pulpits, cupolas. [Danville, VA]

Lancs, UK. Specialises in bespoke GRP mouldings for a wide range of applications. Largest production mould is 28 ft x 9 ft. Majority of production is hand lay-up, some RTM.

Consultants providing services and equipment offered for marine surveying, defence and other industries. Specialists in vacuum bagging.

Prepregger of glass, carbon, Spectra (UHMWPE) and other fibers in epoxy and cyanate ester resins. Also supply adhesives and foams. Owned by Ten Cate of the Netherlands. [Morgan Hill, CA]

French company specialized in filament winding composite parts (glass or carbon fiber, epoxy or polyester resins) [Bagnuex, France]

Provides a concept to production service for users of Fibre Reinforced Thermosets. [Tetbury, UK.]

Custom manufacturing of honeycomb structures, sandwich panels of polypropylene sheets, fabricated metal products for transport, construction and industrial applications. [BC, Canada]

Provides engineering, tooling, and compression molding of high performance carbon fiber reinforced components for Space, Aircraft, Missile, Electrical, and other Industrial applications. (CA)

Manufacture thermoplastic molding compounds reinforced with long fibers - glass, carbon and aramid. Mainly for injection and compression molding. Subsidiary of Hoechst. [Winona, Minnesota]

US importer of fiberglass grating, FRP grating, stair treads, stair tread covers, and gritted decktop. All manufactured in China.

A group of material scientists from various Italian Institutes offers professional advice. They introduce themself and provide a short description of CMC's and their properties.

manufacturer of texturized fiberglass cloth/tape, braided fiberglass rope, fiberglass fire blanket, ceramic and carbon fiber products. [Zhejiang, China]

Custom manufacturer and supplier of composite building materials including pultruded profiles, and panels. [Alpharetta, GA]

Development, design and manufacturing of Composite parts. FW, HLU and RTM. Thermoset resins reinforced with boron, glass, carbon and aramid. [Sweden]

Part of CSG (St. Gobain) group. High performance polymer solutions specializes in flexible, nonstick, and high temperature fire-resistant products. Sheerfill(r) architectural fabrics from beta (3.5 micron) glass yarns, Chemglas(r) industrial fabrics, Chemlam(r) laminates from PTFE film bonded to fiberglass or aramid fibers. [Merrimack, NH]

Develop and manufacture of low-cost, high-performance dispersion strengthened aluminum composites

Manufacturers of FRP Multi Purpose Portable Cabins, Sound Proof Canopies, Machine Covers, Water and Chemical Tanks, Decorated Corrugated Sheets [Pune, India]

Utah. Part maker. Development and production of High-Performance continuous-carbon-fiber composites. Matched-Metal Molding technologies for complex, fully three-dimensional products.

Offers a wide range of pultruded products. Site in English and Spanish.

Produce GRP mouldings for the construction utilities and transport industries. Polyesters, vinylesters, phenolics.

Supply Composite bearings, hydraulic cylinder Wear Rings and Seals.[Derby, UK]

Distributor - Online sales of lightweight composite honeycomb core materials and fillers.

The world's largest trade association serving the composites industry.

Composite Market Reports is a publishing and consulting firm with over 30 years of experience in advanced materials. CMR covers the advanced composites industry worldwide.

Good starting place for searching for data on Composite Materials, from About.com.

Part maker specializing in autoclave prepreg processing for marine industry. S-glass, carbon, aramid, and spectra fibers. [Hingham, MA]

PA. CSS consulting services enable companies to develop and confidently source low cost, high performance FRP composite products from well established overseas manufacturers.

(NSW, Australia) Filament winder of composite spars and tubing for marine and industrial usage, including carbon fiber, fibreglass, aramids and PBO.

NY. Manufactures and installs composite materials for construction and fire protection. Seismic Strengthening; Blast Mitigation ; Concrete Repair; Masonry Strengthening ; Wood Strengthening

Laminate selection software that identifies property contours for laminates containing up to three different ply orientations.

Canada. Design and manufacture of advanced composites for aircraft, space, defense and commercial products. Comprehensive guide to the history of composites and fibers, and composite reinforcement technology. Part of EADS, the German/French aerospace group.

Sponsored electronic journal. News and Market/Applications information on FRP, Composites, Carbon Fiber, Glass Fiber, Resins, Processes, in aerospace, defense, transportation (auto, truck, rail), industrial, sports, recreation, corrosion, ports and harbors, construction, building, civil engineering, marine, infrastructure, and offshore oil.

Specialize in close tolerance manufacturing utilizing filament winding, RTM and hand lay-up methods. We assist clients with material selection, design & analysis, tooling and manufacturability requirements. Utilize an autoclave for pre-impregnated fibers and hand lay-ups, while RTM is used for dry fibers.

Design, product development and manufacture of high performance FW composite tubes for industrial applications, drive shafts, hydraulic & pneumatic cylinders. Marine tubes. Aaxial fibre filament laying process in carbon, glass or aramid. [IOW, UK]

Hamburg, Germany. Comtas designs and produces interior and exterior aircraft components from high performance fibre composites

Carbon fiber composite manufacturing for subsea, offshore industries. FW pressure vessels. Also manufactures specialized X-ray equipment which allows the X-rays through without leaving shadows on the film or negative.[Norway]

Manufacturer of surface and subsea buoyancy products including distributed buoyancy modules, bend stiffeners, cable protection systems and fendering systems

Engineering pages and data for Mykroy-Mycalex glass mica composite. Where to purchase, manufacturing information and contacts listed.

Manufacturer of composite materials such as syntactic foam flotation and insulation equipment for the offshore oil and gas industries including deepwater buoyancy modules, subsea pipeline insulation, floats, risers, flotation technology,fairings,stealthbuoys.

New Haven, CT. Manufactures thermoset high-pressure laminates . Phenolic, epoxy, silicone, melamine, and other resins. Substrates include canvas, linen, glass cloth, carbon fiber and paper. Tube, sheet, rod, and prepregs. Fabrication services available for all NEMA grade industrial plastics including G-3, G-5, G-7, G-9, G-10, G-11, LE, CE and XX.

BC, Canada. Fabrication of thermoforming and thermoset composites. Manufacture kiosks, housing, enclosures, cabinets, bezels for electronic, computer, medical, dental, recreational and industrial equipment

Weaver of industrial textiles using E-glass, ECR-glass, aramid, and carbon for composite reinforcement. [Taiwan]

West Patterson, New Jersey. Leading global prepregger of advanced composites, supplying E-glass, S-2 glass, aramid and carbon fiber prepregs in Epoxy, Cyanate Ester, PEEK and other resins. Also supply adhesives. Aerospace and sporting goods. Manufacture in US, UK and Germany.

Distributer of carbon, glass and aramid fibers and composite materials. Also, core materials, adhesives and fillers. Lists of available quantities. [NC]

Woburn, MA. Contract manufacturer of thermoplastic composite parts. Preforming technologies to support any type of molding process - RTM, S-RIM, Compression Custom process equipment design. Preform parts and machine supplier. Engineering services for specialty composite applications.

University activities on composite materials. Links to local SAMPE and other sites.

Carbon, Aramid and S-glass/epoxy composite tubes. Descriptive intro to composites.

Nova Scotia, CANADA. Designers & manufacturers of fiberglass tanks and products. Repair services.

Manufacturer of high quality fiberglass tables, trash recepticals, recycle containers, planters, indoor/outdoor seating, and Glassform desk accessories. [Compton, CA]

NY. Distributor to marine and automotive industries. Epoxy resins, fiberglass, hardeners, catalysts, chopped and milled fibers, pigments, sealer glaze.

Primarily involved in research and development.

Manufacturing and development of high quality friction and brake material. [South Africa]

Distributor of thermoplastic molding compounds, including carbon and stainless steel fiber concentrates for composites.

Manufacturer of Architectural Fiberglass including column covers, cornice and domes. [Horsham, PA]

Sommerville, MA. Electron beam equipment for composite curing and adhesive bonding of composites and metals. We also offer EB-curable materials including resins and adhesives.

Resin Transfer Moulding (RTM) Systems, GRP Tooling, FRP Tooling, Pattern Making. [Hants. UK]

Manufacturer of hollow glass microspheres used in subsea syntactic foam buoyancy systems, deepwater thermal insulation and drilling riser buoyancy modules. A division of the CRP Group of Companies. [Centon, MA]

Epoxy, polyurethane, adhesive bonding materials and encapsulants. [Wisconsin]

Composite manufacturer for Formula One and high performance vehicles.

Produce prepregs for industrial applications, especially based on large tows. UD and fabric using E-glass, R-glass, carbon and aramid. Epoxy and phenolic. Data sheets. English and German. [Willich, Germany]

Pultruder of GRP sections such as cable trays, gratings, ladders, walkways, handrails, structural sections, cross arms, discharge rods. UP and Epoxy. [Rajasthan, India]

Luxembourg. Manufacturer of lightweight products based on honeycomb core, based on Nomex aramid. The product range consists of various types of honeycomb, panels, formed, milled parts and drop-in parts for a wide range of industries and especially for the aeronautical industry.

Filament wind pressure vessels (Al, Carbon or Inox steel liner with fiber overwrap) and laminate complex forms using carbon, glass and aramid fibers. Vinyl Ester, polyester or epoxy resin. Bilingual English/Spanish site. Eurofiber high technology composites, containers and resistant elements developed with carbon fiber glass fiber ... and complex laminated products special container bags obturer and pressure resistant bags. [Madrid, Spain]

SMC - Sheet Moulding Compound BMC - Bulk Moulding Compound Mission of the SMC-Alliance: To promote the intelligent application of SMC and BMC composites in the automotive, trucking, electrical, construction and other markets.

Belgium based multi lingual site. Grouping of various national composite institutes and professional associations in Europe. Includes non EEC countries

Canada. Manufacturing of bumper or fifth wheel style fiberglass trailers also subcontracting manufacturing of fiberglass parts and moulds

Composite fiberglass pultruder. [Mexico]

Manufacturers of compressed fibre jointing sheets .

Fiberglass woven roving and Fiber Glass Reinforced Plastics. Single ended E-glass roving 1100-8000 tex, texturised rovings, various fabrics for GRP. [Amsterdam, NY]

Manufacture custom composite patrs. Specialize in corrosion-resistant fiberglass reinforced plastic fume & oder control ductwork,hoods,chemical process tanks and scrubber bodies for OEM customers. Wet Lay Up, Chopper Gun Spray Up, FW, Pre-Preg - Vacuum Bag - Oven Cure, RTM & Vacuum Assist Resin Transfer Molding (VARTM). [California]

Manufacturer of fiberglass reinforced panels for the transportation, construction and agricultural markets

FiberCote designs and manufactures advanced composite prepregs for aerospace, RF/microwave/electronic, insulation/ablative, industrial and recreation applications. Vinly Ester, Epoxy and Phenolic resins, E-,D-glass, S-2 glass, Carbon fibers. [Waterbury, CT]

PTFE (teflon) coated glass, Kevlar and Nomex fabrics, high temperature PSA tapes ; conveyor belts ; silicone coated glass fabrics [Corlu - TURKEY]

International directory ens E-marketplace for the GRP industry. Lists suppliers, equipment, services, recyclers, finished products for the GRP industry.

NC. Engineers in the art and science of fiberglass molding and fabrications. From large animals and lighthouses to van covers and spas, also custom parts.

Industrial directory for fiberglass equipment, supplies and services. Locate companies providing insulation, molds, pipes, fabrications, plastics, tanks and serving the Fiberglass industry.

Manufacturing and importing composite parts, components and molds including carbon fiber, Kevlar and handlaid fiberglass into the US for the marine, automotive, architectural and industrial type industries.

Online Catalog of fiberglass reinforced plastic materials and supplies for building and repairing surfboards, windsurfers, boats, canoes, kayaks, cars and many other fiberglass products. [Bingen, WA]

Texas. Information about fiberglass tanks and piping systems

San Carlos, California. Fiberglass Unlimited provides fiberglass storage tank service and modifications, including tank installation, tank repair, and Xerxes tank recertification.

High yield manufacturing and fiberglass fabrication company known for quality, price and ability to mass replicate fiberglass products globally. Specialized in Church Steeples. [Roanoak, AL]

Online distributor of fiberglass, polyester (UP), vinylester, epoxy, gelcoat, aramid, carbon, and other composite materials.

Contains listings composite suppliers - fibers, resins, and components. Companies pay to be listed.

Seattle, WA. Retail supplier of materials used to manufacture and repair of fiberglass parts. Epoxy, vinyl and Polyester resins, Kevlat, carbon and S-2 glass fabrics.

FiberNide was formed to commercialize and manufacture nickel aluminide products. These new products include continuous carbon fiber, nickel aluminide matrix composites, nickel aluminide foams, and nickel aluminide sinters.

Design and manufacturing in composites using carbon and other fibers, for aerospace and industry

Composite Seismic Retrofit of Concrete Walls.

A company whose main focus is finding uses for carbon fiber in aerospace and non-aerospace applications, i.e. string, cable, and rope.

Offer a complete line of fiberglass supplies and composite materials including fiberglass cloth, epoxy resins, carbon fabric, and Kevlar. Excellent online catalog and also some technical information. Wide range of products can be ordered online, export customers outside US also serviced. [Brookville, Ohio]

GRP Decking is designed to replace wooden pontoon decking and for constructing new Marina pontoon decks, fingers, piers, jetties, entrance gangways, bridges, fuelling pontoons and pump out stations. [Essex, UK]

GRP Roof Decking replaces rotten timber Roof Gully Walkways/ Decking. [Essex, UK]

Specialize in GRP forfluid handling, Vinyl Ester and Epoxy. Piping, tanks, dampers, valves, fittings, grating,structures, pipe insulation, and custom fabrication, training, installation.

Fibreglass grating and anti slip stear treads.

Quick Draw vacuum bagging films eliminate extraneous bleeder, breather and resin distribution materials. Suitable for VARTM. [TX]

Manufacturing of carbon fiber composite products for any application, esp. cars and motorcycles. [Benicia, CA]

Manufacturer of cast polymers, coatings, grouts and flooring systems for chemical protection. Only one page on web site

Design and manufacture advanced composite products. Filament winding. (Quebec, Canada)

Manufacturer and wholesale distributor/importer of fiberglass grating and other fiber reinforcement products: molded grating, pultruded, grating molds; E-glass Gun Roving (2400 tex), Woven Roving (400-800gsm), and Chopped Strand Mats.

Japan. Suppliers of chemicals, fibers, resins, color pastes and fillers to the composite products industry. Also, tools, machinery and equipment.

Netherlands. Part maker. Many processes including Filament Winding and Autocalve.

Wholesale company dealing with footwear, handbags and leather

Manufacturers of FRP Furniture Items, Roof Sheets, Sugar Factory Components, Water Slides and Amusement Park Items. [Pune, India]

Mumbai, India. Polyester, Epoxy and Polyimide resin based, fiberglass reinforced laminates, rods, tubes, for electrical insulating material.

Portal for composites, providing news and a business directory.

Manufacturer of fiberglass reinforced composite products including water treatment plant, bathtub, insulation material, building products. Glass reinforced cement and gypsum [China]

Leader in innovation, design, and manufacture of large, high-tolerance, acoustic, and fireproof composite structures for Navy, Marine, and Commercial markets. Large Autoclave (30 ft. x 45 ft.) and VARTM. [Jacksonville, FL]

Ohio, USA. Custom molder & fabricator of FRP. Contract-manufacturing services including compression molding, resin transfer molding (RTM), open molding, machining, painting & assembly of thermoset composites.

Germany. Wholesale distributors of carbon and glass fiber and fabrics for the composite industry. Also, peel ply, release agents, resins, catalysts and auxiliaries, and custom fabricated carbon fiber reinforced sheets.

Release film/fabrics, breathers, bleeders and all equipment for vacuum bagging. Catalog in Adobe acrobat. Los Angeles, California.

Manufacturers of hot compression moulded glass reinforced plastic components using polyester and phenolic thermosetting resins.

Leading global supplier of advanced materials - Carbon Fiber, Epoxy resins and adhesives, glass, aramid and carbon fabrics, prepregs, aircraft flooring and components. [Stamford, CT]

India. Exporters of Mica Flakes and Powders for RRIM, MRP and pearl Pigments.

Heavy tow carbon fibers and components based on carbon fiber composites. Brake linings for aircraft. [Gardena, CA]

Manufacturer of large diameter (18 - 110 inch) centrifugally cast fiberglass mortar pipes with inherent corrosion resistance. Sliplining, microtunneling, jacking direct bury and above ground installations. [TX]

Glassfibre moulder whose component assemblies are to be found on such diverse applications as Bentley cars, in University laboratories, operating theatres, warships, water treatment plants and on deep-sea seismic survey vessels. [Hants. UK]

Manufactures custom fiberglass moldings, industrial off-road ambulances, slide-in truck canopies, insulated reforestation seedling transports, refrigerated truck units and other products.

China. Manufacture FRP grating, mainly to US. Also flowerpots and other Glass/UP parts

Producer of high-temperature refractory composite materials, using chemical vapor infiltration and deposition (CVI/CVD) process technology. [Huntingdon Beach, CA]

Retail/wholesale of composites and polymers manufacturing supplies, vacuum bagging and materials. [Santa Anna, CA]

Manufacture a wide range of metal and nomex honeycomb, sandwich panels and components. [Milan, Italy]

Nottingham. Thermoplastic composite profiles and prepregs. Continuous glass or carbon fibres. Technology or product available.

Industrial brakes and friction materials products including clutch linings, overhead crane shoes and bonded brakes; custom brake bonding and fabrication.

Manufacture and distribution of friction products.

ILN is a manufacturer of thermoset laminate sheet materials for electrical, mechanical and electronic applications. Use phenolic, epoxy, melamine and polyimide resin systems combined with cellulosic paper, woven cotton, glass, nylon, carbon, polyester, aramid and other synthetic fibers, and non-woven fabrics. [Postville, Iowa]

Ohio. Distributor of fiberglass materials and fabrics such as, boat cloth ,woven roving, chop strand mat, E-glass, S-glass, stitch mat, carbon, kevlar, epoxy resins, gelcoats, and gun roving.

Consultancy. Optimization of composite parts and joints, acording to their stiffness, strength, weight, dimensions, shape, cost, etc. [Prague, Czech Republic]

Distributor & machinist of composite materials for high-voltage electrical insulation systems, safety railings & nets (NATO codified), jigs & tools for the circuit board industry. Ployester, epoxy, silicone, polyimide and phenolic resins reinforced with cotton, E=glass, aramid and carbon fibers.

Design, prototype, testing, and manufacturing of composite parts. [Newark, DE]

Manufacture Adhesive Films, Solution and Hot Melt Woven Prepregs, Solution Coated UD Prepregs, Facesheets, Paste and Foaming Core Splice Adhesives, Potting Compounds, Core Edge Fillers, Artificial Stone Veneering. E-glass, S-2 glass, carbon in epoxy and cyanate ester. [Costa Mesa, California]

Manufacture epoxy resins. Over 70 custom product formulations. Annual output in excess of 5 million pounds of material. 100% solids, zero VFC's, non-corrosive hardeners, non-flammable, and private labeling. [San Diego, CA]

Family owned company. Fabricate custom fiberglass and aluminum parts such as battery and cooler boxes for various industries including oil, transportation and marine. [Harvey, LA]

Manufacturer of composites products, prototyping, custom and mass-production for automotive, marine and recreational sports industries. [Dongguan, China]

Vectorply(TM) non-crimp fabric reinforcements for composites applied to infrastructure, auto, aerospace, sports and marine applications. Stitch bonded fabrics offer greater range and flexibility compared to the weaving process. Carbon, Glass, S-glass, Aramid and hybrids.

A specialist manufacturer of materials for the Electrical, Consumer Products and Reinforced Products Industries. Now part of Krempel Group. [Preston UK]

Large NA weaver of E-glass and S-2 glass yarns for electrical and aerospace markets. [Slater, SC]

Manufacturer of polymer-matrix bearing composite from a wide range of reinforcements and resin systems.

Fabricator of fiberglass tanks, ducts, pipe, fittings, dampers, inserts, scrubbers, containment systems, baffles, and weir plates.

Manufacture RTM equipment, Gelcoaters, Sprayup, SMC, materials. [Iran]

Manufacturer of compression molded parts. SMC, LPSMC, RIM and (Reinforced) RRIM.

Provide engineering design and low cost manufacturing to produce high performance composites for the aerospace, military and commercial markets, with specialization in large and unusual pultrusion processing

Supplier of fiberglass parts to the Heavy truck, Automotive, Marine and RV industries for over 20 years. Manufacture in BC (120 employees) and South Carolina (30 employees)

Manufacturer of FRP panels for trailer liners/roofs, Glasbord wall/ceiling finishes, corrugated patio covers and RV Filon sidewalls. Employs over 9,000 people in North America, Europe, Asia and Australia. [Stanford, CT]

Production and distribution of fibreglass composites. Range includes sectional & one-piece water tanks, meter cabinets, custom mouldings, automotive products, road safety products and SMC & DMC compounds. [Kerry, Ireland]

K3C is a site dedicated to facilitate cooperation within and marketing of the industrial composite sector based in the North West of the Netherlands. Lists manufacturers, universities and products. (In English and Dutch) [Northern Holland]

Stourbridge, UK. Manufacturers in glass fibre that offer quality products, help with design, patternmaking facilities, production runs or specialist one off items as well as specialised metal finishes.

Italian producer of technical composite laminates and pre-formed composites. Provides details on products and technologies.

manufactures structural marine pilings for piers, marinas, docks, and wharfs made from composite materials. E-glass in polyester and epoxy.

Australia. Exporter of fiberglass materials including roving, chopped strands, tissue, tapes, high silica fabrics, UP resin, FRP grating. E-glass, AR-glass.

San Marcos, CA. Manufacture elastomeric bladders for composite molding, vacuum bag molding. Also drybox and isolator gloves.

Supply a comprehensive range of advanced composite materials, including prepregs, tooling, CF fabrics, vacuum bagging materials, and sandwich cores. Distributor for ACG. [Queensland, Australia]

Vetrotex distributor. Supply resins, woven roving, CSM, rovings. [Brentonico, Italy]

IL, USA. Global supplier of shielding solutions for EMI/RFI - electromagnetic and radio frequency interference.

Production of composite tubes and products based on glass-carbon-aramid-epoxy. Insulating poles for maintenance of overhead power, telecommunication or traction overhead lines (de-icing, manipulation), current collectors for trolleybuses, insulating tubes and rods, components for ultra-light aeroplanes. [Czech republic]

Manufactures precision components from advanced composites for semiconductor equipment, armor, automotive, aerospace, packaging and thermal management applications. Also ceramic tiles for composite armor. [Newark, DE]

Italy. Production of advanced composite material (carbon, aramid) for aerospace, racing cars, military, marine and composite armor.

Distributor of plastics; chemicals, including peroxide curing agents for polyester resins; and non-woven fabrics. Technical support, competitive prices and very fast delivery. [Hertfordshire, UK]

Software, engineering design and prototyping for filament winding of fiber reinforced plastics (composites). [Zaventum, Belgium]

Database includes thermoplastic and thermoset polymers, aluminum, cobalt, copper, magnesium, nickel, steel, titanium and zinc alloys, plus a growing list of ceramics. Fiber and some composite data.

Composite seats for aircraft, composite armor for marine, aerospace and military. [Dudley, UK]

MMCC is a custom manufacturer of particulate and continuous fiber reinforced aluminum and copper alloy castings.

Manufacturer of mica products.

Manufacturer and exporter of all types of Mica and micanite products, including powder, flakes and mica 'V' rings-cones.

Metal Matrix CompositesC-ASSESS Thematic Network. Suppliers, literature, conferences.

Home site for the DTI sponsored MMS15 Project to develop an Interactive Knowledge Base IKB on NDE (Non Destructive Evaluation) of composites

Design and produced long fiber thermoplastic composites .

NADC is focused on composite parts analysis,design, production and repairs. Offers atmospheric and non-atmospheric technology for primary and secondary parts from glass, carbon and hybrid reinforcements, various resins and honeycombs. Aerospace and other parts. [Czech Republic]

Distributor of Vacuum Bagging support materials: Release films and fabrics, Breathers and Bleeders, Bagging films, Sealant tapes, Flashstripper tapes, Vacuum hoses, valves, fittings, and pumps. Cutting surfaces, and wheel cutters. [CA]

Agrotechnology & Food Innovations is an organisation for applied research with an emphaisis on sustainable development. They have developed natural fiber reinforced PP thermoplastic composites. Wageningen, NL]

Composites and Reinforced Plastics information center. Includes books, job listings, articles. Useful data for students or people new to the technology. All resisn and reinforcements included.

Owned by Mistubishi Rayon Ltd. Leading prepregger of Carbon and S-2 glass. Designs, formulates and manufactures high quality composite materials and epoxy resins for the Aerospace, Industrial and Sports Markets.

Manufacturer of specialised glass fibre, rubberized glass cord and glass flake. Owned by NGF (Europe), part of NSG (Japan). E-glass, K-glass and U-glass

Mesh and fabrics woven from AR-glass. EIFS reinforced mesh, GRC(Glassfiber reinforcement cement)mesh, and self-adhesive fiberglass tape. [China]

Manufacturer of AR (alkali-resistant) fiberglass mesh. [China]

AR-glass fabrics and tapes. [NINGBO, CHINA]

Manufacturer glass fiber yarns, rovings and flakeglass. E-glass, K-glass, U-glass, C-glass. Owned by Nippon Sheet Glass.

France, USA. Hollow glass (noblite and perlite) microspheres. Lightweight filler.

USA. Representatives and distributors of structural process materials for the composite, metal bonding and tooling industries. Vaccum bagging materials, peel plies, mold releases, adhesives, composites, fiberglass cloth, uni-directional, woven prepregs, and carbon cloth.

Mexico. Teflon and silica coated Fiberglass. Fabrics, Tapes and Belts.

Manufacturers of phenolic laminate heat shields to the automotive, rail, mass transit, aerospace, petrochemical & defence industries. Part of the Dutch Koninklijke Econosto N.V. or Royal Enonosto group.

Manufacturer of thermoset composites (glass, Kevlar), vulcanized fiber, custom containers, circuitry materials, custom fabrication, welding products, and molded plastics.

GRP parts made using HLU [Sri Lanka]

Producer of glass fiber, for housing insulation as well as composites. Site contains technical data on GRP.

Many digital pictures covering composiutes and applications, as well as other glass fiber industrial products for building and insulation.

Bonded structural panels manufactured from a variety of lightweight, high strength materials. [Oakland, CA]

Carbon Composites for Motor Sport; F1 , F3, Sportscar, GP Bikes, Superbikes, Hillclimb. Carbon tooling & Moulding, Water Jet abrasive cutting , CAD/CAM. [Oxford UK]

A light-weight sandwich material made of 100% E-glass. Consists of two decklayers with inter-connecting piles in between. Applications for structural and non-structural parts.

Manufacture open mould glass fibere parts, hand layup. [Kathmandu, NEPAL]

CA. Partmaker of fiberglass and composite products.

Somerset, UK. Filament winding or moulding from Prepreg materials. Carbobn aramid and glass in epoxy. Guideline mechanical date provided.

Permali supply phenolic and epoxy composites for use as aircraft cargo liners, fire resistant and low smoke panels, ballistic armour and cryogenic supports. Also tubes and foam materials.

Peterson Products is a manufacturer of fiberglass reinforced composites. Hand Lay Up (HLU) and Spray up. Our process begins in the design phase, through patterns and tooling, right up to production and detailed finishing. [Belmont, CA]

Manufacture composite parts for architectural, commercial, industrial, transportation and marine applications. Open molding and LRTM.[Mooresville, NC]

UK. Consultancy Services for design and implementation of composite materials in transport and oil and gas industries

Partmaker specializing in molding panels. Glass and carbon fiber. HLU, Spray up, Resin Infusion, cold forming, compression molding, RTM, SMC and SRIM. [Jefferson, Ohio]

Manufacture lightweight/high strength honeycomb core materials (Aluminum, Nomex(tm) and Polycarbonate) for the aerospace and commercial composites industries. Meets MIL-C-7438, MIL-C-81986, AMS 3711 along with customer specs. Min. order $500. [Zeeland, MI]

PPI is the world's leading pioneer in the design and development of composite recycled plastic and steel pipe core or fiberglass core piling, marine camels and reinforced and unreinforced lumber.

Manufacturer of laminated composite structures for rail, entertainment, marine, aerospace, military and space applications. Contoured, flat or laminated Structures. FOD Shields. Honeycomb Structures. [CA]

Manufacturer Polyester (UP) resins, gel coats, pigments, waxes, release agents. Available online. (Istanbul, Turkey)

Weaver of E-glass, S-2 glass and carbon. Leader in fabrics for electrical industries. Owner of BGF. [Badinieres, France]

High temperature insulation, industrial gaskets, filtration, sealing, and conveyor rolls. [Bezouotte, France]

Manufacture Continuous-Fiber Reinforced Thermoplastic Products. [Israel]

USA. Glass fiber for nonwoven and textile applications. Fiberglass fabrics, products and composite structures for automotive, construction and manufacturing industries. Description of manufacturing process, characteristics and properties of glass fiber. Library of research articles. Enter upon registration.

Pacific Radomes, Inc., manufactures precision composite reflector and radome structures for a broad range of RF antenna applications [Santa Clara, CA]

Thermoset composite company develops, manufactures and markets molding compounds and custom-molded parts.

Prepregger founded about 40 years ago. Supply to industrial, sporting, aerospace and ballistic armor markets. Work with E-glass, S-2 glass, Carbon, UHMWPE and other fibers in epoxy, phenolic, polyester resin. In English, French, German, Italian and Spanish. [Middleton, UK]

Automotive, motorsport, aerospace, marine, furniture, leisure, medical. CAD design, pattern, mould. Pre-preg carbon fibre, e-glass, autoclave, resin infusion, compression moulding, wet-lay up, trimming. Prototypes, pre-production parts, mass production. [Bordon, UK]

Taiwan. Manufacturer of tennis & badminton rackets, golf shafts. Compression molding/ blowing molding. 1K-3K-6K Woven Graphite, aramid, glass and hybrids.

Pultrusion Manufacturing Company. Wide range of fibreglass pultrusions and plastics. Polyester, Vinyl ester, Urethane. [Gisbourne, New Zealand]

Consultancy providing advice on the design and manufacture of pultruded profiles and associated processing equipment; product feasibility studies to complete factory set-ups and technology transfers. [Liverpool, UK]

Switzerland. Manufacturers of semi-finished and finished specialty engineering thermoplastics and composites. Technicla information on PDF files. English and German.

Produces raw and finished custom carbon fiber parts. Design & development, engineering services and consulting. [Hood River, OR]

Industrial fibers, cable and rope machinery. [Fredrikshavn, Denmark]

Illinois. Thermoset polyester molding compounds for automotive, appliance, kitchen and bath, countertop and electrical use.

Mould, pattern and model makers to the automotive, aerospace and motorsport industries. Specialists in CADCAM CNC 5 axis machining RIM RTM PU composite moulds, mouldmaking up to 20 tonnes, online project management. Worldwide customer base. Drawings/specs. can be sent over the internet.

Fabrication and design of advanced composites for aerospace, defense and microwave industries. Autoclave, compression, and vacuum bag molding of all laminated materials. Space Flex composite rubber parts. [Minden, NE]

MI. A resin transfer molding and Vacuum molding supplier of equipment, consumables and know-how. Designer, educator, support company. Thebsite provides links to raw materials suppliers and RTM processors.

Multi-axial and Non Crimp Fabrics (NCF) for composites in glass and carbon fibres including S-2 glass/Carbon hybrids for aerospace. Also supply to marine, civil engineering (including sewer repair) windmill and automotive industries. [Saerbeck, Germany]

India. Manufacturer of mica and mica based insulation and composites for the Locomotive, heating appliance, and furnace industry where high voltage and temperatures are required.

World leader in glass manufacture. Global web site.

Manufacturer of composite armor. Glass, aramid and UHMWPE. [Denmark]

Polyester and Vinyl Ester resins for the composites industry.

Supply fiber glass products from OC, Johns Mansville and BGF.

Offer a range of consulting services, research, product design, prototyping, and a full line of advanced production equipment. Thermoforming.

Manufacturer of GRP polyester resin items. [Mexico]

Manufactures heavy tow (48k-360k) PAN carbon fiber and graphite products at 25 locations in 10 countries. [Wiesbaden, Germany]

Filament winding systems for the reinforced plastics (composites) industry. Standard and custom machines, retrofits, installation, training, consulting. [Laguna Beach, CA]

Vinyl ester prepregs,7781 glass, aramid and carbon. Bi-lingual French - English site. Laminate/resin data downloadable in .pdf format [Quebec, Canada]

Compression molding, hand lay-up and autoclave. Research and development, engineer and manufacture composite products.

UK. Manufacturing low maintenance shatter/vandal proof GRP & Phenolic Flat Sheet Products that don't drip, melt or soften in fire. Optional cores, solid colours, surface textures/finishes for most in/external glazing/cladding purposes.

UK. Design, development and manufacture of advanced composite materials, specialising in materials technology and composite engineering for large structures. Detailed technical information, specifications, glossary, and technical guides on PDF files. Leaders on compsoite marine and windmill structures.

Manufacturer of composites for the automobile industry and other fields using technologically engineered products and composites. Manufacturer of Mykroy-Mycalex glass-mica composite. Prepregs, FW, laminating. [Rochester, NH]

part making division of SGL Carbon.

Designs and manufactures advanced composites, metal bonded components, and aerostructures for aerospace, defance, diagnostic imaging, and survival equipment.

Manufacturer of high temperature silicon carbide composites and ceramics .

(Zullwil, Switzerland) Aerospace prepregging, pultrusion. E-glass, S-2 glass, carbon in epoxy and phenolic. Own AIK Advanced Composites GmbH

S.L.I. is a Honeycomb sandwich panel and composite part manufacturer [Brighton, CO].

Offer the following services for industry, small business, and individuals: prototyping, production, short- and long series, product development, design consultation, development of process technology, autoclave capabilities. rapid prototyping.

Taconic is a worldwide manufacturer of advanced, engineered composite materials consisting of Teflon(R) coated fiberglass, Kevlar(R), and Nomex(R).

US distributor of E-glass and S-2 glass fabris, Polyester and epoxy resins, plastics. Focus on boat and race car enthusiasts, and anyone who enjoys creating their own ideas from plastic. Useful for the do-it-yourselfer. Will sell small amounts over the internet, shipping globaklly. Good technical advice on resisn, and fibers.

Manufactures metal (Stainless steel, Hastelloy-X, FeCrAlY) fiber based products for the aerospace, power generation, and process industries. [Deland, FL]

UK. Manufacturers and fabricators of lightweight honeycomb panels, composite structures and adhesive bonded assemblies for the Rail, Aerospace, Defence, Marine and Motor Racing Industries. Carbon, Kevlar, and glass skins plus anodized, painted aluminium, and stainless steel.

Ten Cate weave E-glass, S-2 glass, aramid (Kevlar + Twaron), UHMWPE and carbon / graphite. Manufacture prepregs for aerospace and ballistic armor. Applications listed for advanced thermoplastic prepregs (CETEX*R). Owner of Bryte in CA. [Holland]

Produce PAN based Carbon fiber, High strength, high strain. 3k, 6k, 12k and 24k. Supply to European market. 100% owned by Toho Tenax Ltd. of Japan, part of Teijin Corp. [Wuppertal, Germany]

Manufacture materials for casting, laminating, foam coating and mould making.

Weave fiberglass fabrics, tapes, braided, twisted, knitted ropes and tubes, welding blankets as well as electrical insulation tapes and sleeves. [China]

Links page to sites on research, manufacturing, supplying, publications and organizations related to the advanced composites industry.

Distributors of all types of composite materials: E & S-glass, Kevlar and carbon tow, tape, rods, tubes, laminates and fabrics, epoxies and core materials, molding and vacuum bagging supplies. Small orders welcome, credit cards accepted. Some useful technical data and molding advice [Tehachapi, CA]

Thomas Products is a manufacturer of high quality fiberglass storage cabinets designed to protect fire extinguishers, breathing air packs, and other sensitive equipment from exposure to harsh, corrosive environments

Industrial directory of about 300 fabricators of fiberglass, fiberglass tanks, fiberglass panels, plastic columns and reinforced plastic.

Manufacturer of fiberglass pools, tanks, syrup kettles, buildings, and enclosures. [Louisiana]

Leading producer PAN based carbon fiber (in Japan, USA and France). Prepreg in Japan and USA. Also produce parts by molding and Filament Winding.

Spain. Produce of molds, prototypes and components of carbon fiber for automotive and aeronautical uses.

Composite materials listed by trade name. Does not cover all materials, nor completely up to date, but useful.

Suppliers & Manufacturers of Carbon, Glass & Aramid Fibre Composite Tubes to the Military, Industrial Tube and Sport industries.

Production of pultruded profiles, filament wound products. Glass, Aramid, Carbon, Polyester [Kamnik, Slovenia]

Design and manufacture grp - glass reinforced polyester. Fibreglass cabinets, tanks, dormers, cladding, signs. [Lancs, UK]

Sales of marine and composite materials including carbon fiber, polyester, vinyl ester, and epoxy resins.

CA. Formerly YLA Cellular Products. Design, manufacture and market specialty honeycomb materials under the trade name Ultracor.

Ntherlands: Fire-retardant, high temperature and armoured composite product. Supply from design up to production, for aerospace, defence, interior, marine, offshore, construction, mass transit and other advanced industrial applications. Thermoset resins with most fibres

Center for research, education, and technology transfer of composite materials. Internationally recognized for success over 30-year history

Weaver of diverse industrial fabrics including aluminum filtration, fiber-glass, combo bags, cotton, insulation, PTFE, adhesive tapes, industrial textiles, filter-aid bags, nylon, polyester, tubular fabrics, conveyor belts, geo textiles, furnace curtains, insulation materials [India]

Manufacture a range of products for composites manufacturers including gel coats, bonding adhesives, mold releases, and resins. Features how-to and troublshooting guides.

Engineer and manufacture high performance composites and thermoplastics for military, aerospace and commercial applications.

Thermoplastic LCP reinforcements used in aerospace, ocean exploration and development, electronic support structures, recreation and leisure industry, safety materials, industrial applications, ropes and cables, composites, and protective garments. [Charlotte, NC]

Leading manufacturer of Fiber Glass reinforcements, with a plant in Wichita Falls, Texas. Vetrotex CERTAINTEED is the U.S. branch of SAINT-GOBAIN'S Vetrotex International Fiber Glass reinforcements division.

A comingled E-glass/thermoplastic (Polypropylene)tow. Some mechanical data, to ASTM in SI units

Information on PAN based carbon fiber technology

Makers of the FiberSIM suite of software tools for composite design and manufacturing. [Waltham, MA]

Manufacture Prepreg equipment for carbon and graphite fibers, Kevlar, boron and fiberglass fibers. ,"S-Wrap"? impregnation, Dual product rewinders, 100 ft./min. production speed. [Anaheim, CA]

Fibreglass products including surf ski's, truck cones and wind deflectors, and kit cars. [Brisbane, Australia]

Useful large Database of Composite Related Web Sites. Search engine could be more sophisticated - each site can have up to 18 key words. Listing free. Job opportunities and materials for sale.

Technical Data for precision cut fibers and flocks. Polypropylene, aramid, cotton, PAN. Used for ceramics, asbestos replacement. Also glass microbeads used as a filler for thermoplastics. [Somerset, UK]

Manufacture fiberglass products in both architectural and construction aspects. [Hong Kong]

USA. Development and manufacture of high performance composite materials and forms. Detailed product catalog, including technical information and specifications. Job offerings. Glossary of terms.

Pultrude sections using glass and carbon fiber in polyester, vinyl ester and epoxy. [Guangdong, CHINA]